The hottest generator of Ningbo Asia Pulp and pape

Ningbo Asia Pulp and paper incinerator back pressure unit technical transformation project generator factory test completed

release date: Source: pulp and paper technology browse times: 2724. Power supply: 750w80 copyright and disclaimer

core tip: Recently, Ningbo Asia Pulp and Paper Co., Ltd. 25MW incinerator back pressure unit technical transformation project, the mixing head of the coating system has also changed significantly, and the generator factory test has been successfully completed. On March 26, Jinguang group Ning 3 Recently, the generator factory test of the 25MW incinerator back pressure unit technical transformation project of Ningbo Asia Pulp and Paper Co., Ltd. was successfully completed

on March 26, the supervision representative of Ningbo Asia Pulp and Paper Co., Ltd. of Jinguang group, accompanied by relevant personnel of Hangzhou Steam Turbine Engineering Company, made a special trip to the rotor workshop of Hangzhou Steam Turbine Co., Ltd. to inspect the finishing of cylinders and other parts

at the processing site, the oil cleanliness requirements of the steam turbine in this project are lower than those of the electro-hydraulic servo valve machine. At present, the rough machining has been completed, the upper cylinder of the steam turbine has been finished, and the lower cylinder is in the finishing process. The cylinder is expected to be transferred to the joint stock company in the middle of April. The owner's supervision representative recognizes the current manufacturing progress of the steam turbine, and hopes to spare no effort to ensure the progress, quality and quantity under the premise of scientific and meticulous prevention and control of the epidemic, It can ensure that the steam turbine generator unit is delivered on time in early August

on March 31, the supervision representative of Ningbo Asia Pulp and Paper Co., Ltd. of Jinguang group, accompanied by relevant personnel of the engineering company, went to Hangfa company to conduct on-site verification on the factory test of the generator

through a series of tests such as short-circuit characteristic measurement and no-load characteristic measurement of the generator of the project, the owner's supervision representative recognized the quality of the generator, and hoped that the capacity would strive to deliver with quality and quantity as agreed in the contract, so as to realize the construction period and generate electricity